Mașinile uzate: Mașini de modelat prin injecție

This Krauss-Maffei 150-700 C2 Injection moulding machine was manufactured in the year 2003 in Germany. It is equipped with a clamping force of 1500 kN, a SP 700 injection unit with a screw diameter of ...

This KRAUSS MAFFEI KM 65/80 CX Injection moulding machine was manufactured in 2010 in Germany. This machine is equipped with a hydraulic clamping unit with a clamping force of 650 kN. It has a tie bar ...

This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke ...

This Battenfeld VM 150/525 R1280 Unilog B6P Injection moulding machine was manufactured in the year 2015 in Austria and has 40470 production hours. It is equipped with a BATTENFELD UNILOG B6 control ...

This ARBURG Allrounder 420S 1300-675 Injection Moulding Machine was manufactured in 2004 in Germany. It has a clamping force of 1300 kN and is equipped with a 55mm screw with 2080 bar injection ...

This SUMITOMO SHI DEMAG Ergotech 350 Concept Injection moulding machine was manufactured in the year 2003 in Germany. The machine has a clamping force of 3500 kN and a screw diameter of 60 mm.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2017 in Austria and has 50249 production hours. It is equipped with a Engel CC300 control unit. The machine is ...

This LS MTRON LGH170D-ES Injection moulding machine was manufactured in the year 2017 in China. This machine has a 1706 kgf/cm2 pf pressure. Contact us anytime for further questions.
Injection ...

This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm ...

This Krauss Maffei 1300/14700 MC Injection moulding machine was manufactured in the year 1998. It is equipped with a Siemens S7 control unit. The machine has a clamping force of 13000 kN and a screw ...

This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).
General Data

This ARBURG Allrounder 420 C 1000 - 290 Golden Edition Injection moulding machine was manufactured in 2022 in Germany. It is equipped with a Servo-controlled injection unit which has clear distance ...

This HPM Hemscheid 2500-1400 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 2500 kN and a screw diameter of 63 mm.
General Data

This HPM Hemscheid 750-250 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 750 kN and a screw diameter of 36 mm.
General Data
Measurements ...

This HAITIAN JU650II Injection moulding machine was manufactured in the year 2018 in China. The machine has a clamping force of 6500 kN and a screw diameter of 80 mm.
General Data

This FERROMATIK MILACRON k-tec 40 S Injection moulding machine was manufactured in the year 2004 in Germany. The machine has a clamping force of 400 kN.
General Data
Machine weight: 2800 ...

This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min ...

This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.
Main drive
Distance between bars: 1120 - ...

This injection moulding machine, the ARBURG 420C-1000-250, was manufactured in 2001. It is designed to deliver consistent performance and reliability for various plastic manufacturing applications. ...

This ENGEL E Victory 740/160 injection moulding machine was manufactured in 2011, featuring advanced handling capabilities. Noteworthy for its efficiency and reliability, this machine is a staple for ...

This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production ...

This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. It's notable for its efficiency and ease of ...

This injection moulding machine, manufactured in 2000 by DEMAG, model Ergo-Tech 350 Concept, comes with handling technical specifications, making it a prime choice for efficient and reliable ...

This KRAUSS MAFFEI 150-700 C2 Injection moulding machine was manufactured in 2000 in Germany. This machine offers a clamping force of 1500 kN and features a mold mounting platen sized at 780 mm x 790 ...

This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for ...

This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding ...

This used injection moulding machine was manufactured in 1999. An ARBURG 420C-1000-250, it's designed for precision and efficiency in production. Ideal for a wide range of plastic moulding ...

This used injection moulding machine manufactured in 2001 by DEMAG, model D125-320h/120v, comes with handling features, designed to optimize production efficiency and reliability. A robust example of ...

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced ...

This Arburg ALLROUNDER 1200 T 800 - 70 Injection moulding machine was manufactured in the year 2017 in Germany and has 2090 pump hours. The machine has a clamping force of 800 kN, is in very good ...

This Arburg Allrounder 420 C 1300-350 injection moulding machine was manufactured in 1998. It features a clamping force of 1300 kN and offers screw diameters of 35, 40, and 45 mm, allowing versatile ...

This HYUNDAI 450 injection moulding machine was manufactured in 2001. It features a screw diameter of 76 mm, an injection pressure of 1840 ㎏/㎠, and a mould clamping force of 450 tons. The machine ...

This injection moulding machines was manufactured in 2001. The Ferromatic K-Tec 350 S/2F is known for its robust performance and reliability, suited ideally for a variety of injection moulding ...

This ARBURG Allrounder 630S 2500-800 injection moulding machine was manufactured in May 2016. It offers a robust 2750kN clamping force, with a hydraulic drive system and precise control features, ...

This injection moulding machine, manufactured in 1999, has a robust design, weighing 53 tons, with a closing force of 11000 Kn. It includes hydraulic closing, M24 clamping threads, an ENGEL robot for ...

This injection moulding machine was manufactured in 2022. With a closing force of 15960 Kn and an opening stroke of 2500mm, the Italtech KS 1600/10800 offers precise control and ample space between ...

This DEMAG Ergo-Tech 250-1450 injection moulding machine was manufactured in 1995. It comes equipped with handling capabilities, tailored for intricate and precise manufacturing processes. This ...

Machine in very good condition (= photo)Operating hours 12`800hEquipment:- 4 temperature control points for hot runner- granulate dryer- conveyor belt- temperature control unit- Waste chipperMould ...

Mould clamping unit
locking force:   60 to
die opening stroke max.:   450 mm
mould height min.:   200 mm
mould height max.:   650 mm

Mould clamping unit
locking force:   650 to
die opening stroke max.:   925 mm
mould height min.:   300 mm
mould height max.:   900 mm

warehouse no.: 503439
manufacturer: ENGEL
type: Victory 1050-220 TECH
controller: CC100
year of construction: 2006
operation hours: 92465 h

technical ...

screw size 30 mm
closing pressure 600 kN
total power requirement 70 kW
weight of the machine ca. t
dimensions of the machine ca. m
injection shot weight in Polysterol ...

Catalog No. : 7423
Type: ES 200/50 HL ST
Producer: Engel
Made in: 1998
Characteristic:
Clamping force: 50 t
Plate dimensions: 510x320 mm
Weight of ...

Catalog No. : 7418
Type: Concept 420/810-2300
Producer: Demag
Made in: 2006
Characteristic:
Clamping force: 420 t
Screw diameter: 60 mm
Injection ...

2021 AEB engineering, water demineralization system which has run less than 10 hours and is not used since then.

1) Be sure you have an Appropriate Area for the size of the machine

KrausMaffei (KM200-700 C1) Injection molding machine

Technical data

Injection moulding machine KM 200-700 C1
Machine number 61007782
Year of construction 2006

Injection molding machine ( machine is in production and can be viewed if there is demonstrable interest.
Wittmann Battenfeld Eco Power 110/350, with Unilog B 6 control;
Year of ...

Injection molding machine KraussMaffai KM 1300-14700;
Year of manufacture 1998;
Machine complete and intact.
Including Händling PSA 2080 (PSA = formerly Peter Suling Automation, now ...

mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds; well-kept facility, was hardly in use

Technical data:
ultrasonic power: 8,4 kW